|
Relays & Meters  Broyce Control SYNCHRONISING CHECK RELAY (DEAD BUS) - 70SCRD  |  | Features:
- Monitors two AC Supplies for correct Voltage, Frequency & Phase Angle
- Adjustable Trip Level
- 'Dead Bus' Facility
- DPDT Relay Output 8A
- Surfacre mount or DIN Rail 100mm width.
- LED Indication
Click here for technical manual (PDF 101k) |
| Broyce Control Under/Over Voltage Monitor - PDS BC-M1CVR |  | Features:
- Monitors Supply for Overvoltage and Undervoltage.
- Adjustable trip levels up to 25% overvoltage and 25% undervoltage.
- Adjustable time delay (starts when overvoltage or undervoltage condition trips).
- Trips without delay if undervoltage exceeds 30%.
- 1 x SPDT Relay Output 8A
- DIN Rail Housing 18mm
- LED Status Indication
Click here for technical manual (PDF 101k) |
| Broyce Control Phase and Under/Over Voltage Monitor - PDS BC-M1PRC |  | Features:
- Monitors Supply for Phase Failure, Phase Sequence, Overvoltage and Undervoltage.
- Adjustable trip levels up to 30% overvoltage and 30% undervoltage.
- Adjustable time delay (starts when overvoltage or undervoltage condition trips).
- Trips without delay if undervoltage exceeds 30%.
- 1 x SPDT Relay Output 8A
- DIN Rail Housing 18mm
- LED Status Indication
Click here for technical manual (PDF 101k)
|
| Broyce Control Phase & Undervoltage Monitor - PDS BC-M3PRT |  | Features:
- Monitors Supply for Phase Failure, Phase Sequence and Undervoltage.
- Adjustable undervoltage trip level.
- Adjustable time delay (starts on undervoltage condition).
- Trips without delay if voltage falls below adjustment range.
- 1 x DPDT Relay Output 8A
- DIN Rail Housing 36mm
- LED Status Indication
Click here for technical manual (PDF 101k) |
| Broyce Control Hour Meter - PDS BC-BDHRM |  | Features:
- Hour Meter reading up to 99999.9 Hours.
- DIN Rail Housing 36mm
|
|